New universal spinner CN-U Spinner Pro 32 mm.
ALL PARTS (collets, hubs) from the previous version of CN Spinner Pro 32 mm are suitable for the new version of CN-U Spinner Pro 32 mm.
Also suitable for collets and hubs from new CN-U Spinners Pro 30 mm.
The advantage of CN "Universal" spinners is that you can change the spinner
30 mm to the spinner 32 mm, while the collet and the hub remain the
same.
CN-U Spinners Pro 32 was designed for inrunner motors, which are fixed on the frame in the traditional way (by front side of a motor).
Diameter motor shaft or hole in the collet = 4 mm
Distance between the axes of the blades = 24 mm
Blade tilt angle = 0.
Prop hinge pin diameter = 3 mm
Prop blade root width = 6 mm
The aluminum hub with replaceable collet is developed for pilots who want to take full advantage of the capabilities of their glider. The construction is light
and strong. The existence of a collet will allow to use the same spinner for motors with different diameters of shafts. You can easily and quickly replace both the blades on the CN-U Spinner Pro 32 or the entire spinner if the weather changes.
The hub and collet are made by milling of aluminum with further anodizing. The shape of the hub will allow to fold the blades closer to the fuselage for drag
reduction when gliding.
The shockproof cone is cast in glass-nylon composite.
